CAP600 Series & CAP1200 Series Central Air Purifiers
The Ultimate in Whole House Air Purification

When it comes to harmful air pollutants, what you can’t see can hurt you. CAP600 series and CAP1200 series Central Air Purifiers with true HEPA filtration are often recommended by allergists, pediatricians and other healthcare professionals for patients with allergies, asthma and other respiratory problems. CAP600 & CAP1200 series models represent the ultimate in home air purification systems that deliver clean, pure healthy air into your customers’ homes.
All CAP600 series and CAP1200 series models feature a HEPA filter that is tested and certified to an efficiency of 99.97% or higher at 0.3 microns. This HEPA filter is similar to the kind used to cleanse the air in hospital operating room suites. Your customers can also add-on an optional UV-C or UV Plus lamp for enhanced control of microbes, VOCs and odors.

HEPA Filter Captures Microscopic Contaminants: No other filter captures microscopic contaminants as effectively as a true HEPA (High Efficiency Particulate Air) filter. Scientific studies have shown that more than 99 out of every 100 particles in indoor air are smaller than one micron in size–far too small to be captured by most upgraded filters let alone low-efficiency throwaway furnace filters. The HEPA filter used in the CAP600 series and CAP1200 series models are tested and certified to capture at least 99.97% of particles 0.3 microns in size.
Internal Motorized Impeller Circulates Air: CAP600 series and CAP1200 series Central Air Purifiers are designed to supply HEPA-filtered air to the entire conditioned space in the house without adding any load to the HVAC motor & blower. A powerful, internal motorized impeller pulls contaminated air out of the return, through the filters and pushes the purified air back into the return plenum. A typical installation can replace the entire volume of air in the home with purified air up to 75 times per day. Simple Partial Bypass Installation: Installing CAP600 series and CAP1200 series units in a “partial bypass” configuration further enables the units to pull air through the highly-efficient filters without adding any appreciable load to the HVAC motor & blower. Bypass connections are made by cutting a 10-inch diameter hole into the return duct and connecting the inlet of the CAP unit to the duct with 10-inch rigid or flexible ducting. The exhaust of the CAP unit is similarly connected into the return duct or plenum downstream from the inlet connection to complete the "bypass loop".

A HEPA Home is a Healthier Home
CAP600 series and CAP1200 series units are designed for use in both new installations and for retrofit applications. CAP600 series models are designed for use in one to four ton forced-air systems. CAP1200 series models are designed for use in larger (four to ten ton) residential and commercial systems. One CAP unit is required for each HVAC system and installed by a licensed HVAC professional.